…to wall studs Slotted holes line up with the Pack Rack. Constructed of sturdy galvanized steel for a lifetime of service. 24-3/8" overall length.Spacers between clamp storage slots measure 1.33" wide. Clamp storage slots measure .30" wide.Rack may not accept all F-Style Clamps
$15.99
For use with the Kreg K4 and K3* Jig, these blocks are great for quick and easy repair work.Each spacer compensates for 1/4" in material thickness. Simply add the blocks tothe bottom of the Jig's Drill Guide. Use one block for 3/4" material, 2 for 1" materialand 3 for 1-1/4" material. Includes 3 blocks…
$9.99
This optional Dowelmax 1/8" spacer plate enables centering for Dowelmax Classic and Dowelmax Jr. doweling jigs on 1" thick work pieces. It also allows for different offset options when used in combination with other Dowelmax spacers.
$8.50
The easiest way we know how to keep your deck boards spaced consistently! Provides the same measured space between deck boards Spacing helps keep your deck clean and dry, reducing twisting and bowing, by maintaining proper air flow Choose 1/4" or 5/16" Expanded 5/16" ring compensate for expanding…
$9.99
Use these space balls to center raised panels in their frames thereby ensuring flawless frame and panel assemblies. Perfectly centers and tightly secures solid center panels in the frame. Insert space balls in your rail and stile grooves to prevent panel rattle. 8-10 space balls per door…
$6.49
Designed to work with the Compact Blumotion Overlay Hinges, these Hinge Cup Spacers allow you the use the deeper Blumotion hinge cups in a door that was previously drilled for the older, shallower hinge cups. The spacers are precisely dimensioned to add just enough clearance, and eliminate the possibility…
$6.99
…(27099) and the 22" Kitwith the 22" Birch Pullout Kit (29847). Each kit includes one pair of standard guides,two side panels, a bag of screws and two spacers.
From $36.29
…the Micro Jig GRR-Ripper Basic 3D Push Block System (GR-100) Sold Separately.Additional spacer and stabilizing accessory plate for extra control, ideal for narrow ripping.Attachment kit consists of additional spacer and stabilizing accessory plate for extra control ideal for narrow ripping.
$20.00
Allows BLUMotion Clip Top Hinges to be used with hinge cup hole less than 13mm deep. The spacers fill in the gaps for a solid interface. Often necessary for retrofitting or for thinner doors and narrow stiles where drilling a 13mm cup hole risks boring through the face of the door (e.g. if the door's…
$2.99
Plow out perfect, flat-bottomed grooves from 1/4" to 7/8" wide with the Irwin Marples 8" Stacked Dado Set. With 3 spacers and 7 shims, it's easy to get the perfect width without having to "wobble" the blade, which can cause chipping. Up to 20 different widths can be achieved with different combinations…
$119.99
Application: Creating attractive V Groove paneling Set includes spacers that allow you to produce V paneling from 1/2", 3/4", or 1" thick stock. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on table-mounted portable routers.
$177.47
…well as left and right corner fastening. Simply drillyour holes with the included bit and drive the deck screws with the included squaredrive bit. Spacer rings are included to ensure uniform, accurate spacing of deck boards.
From $79.00
…are available in four different sizes, each adjustable to fit the exact width of your space. All mounting hardware comes with the kit, including spacers that can be used to keep the rod from retracting to a fully vertical position. These are handy when using closet panels less than 14" in depth. Units…
From $67.29
…-solid joints that last a lifetime.Mills perfect 1-3/4" rail and stile joints for exterior doors.To mill 1-3/8" interior door joints, simply remove spacers from each bit.Milling a tenon of virtually any length is easy: the top cutter and bearing of the rail bit is simply unscrewed from the lower cutter…
$199.97
Decorative hardwood spacers, smoothly sanded and ready for finishing. Use on plate rails, spice racks, headboards and more. 8 per pack.
$5.49
Obtain the perfect mandrel length for any pen kit. Just loosen the locking collar and adjust the mandrel as needed-no more hassling with spacers. Turn two barrels at once, or single barrels up to 6" long. Consult your lathe's instruction manual to determine the appropriate MT size. For 7mm pen bushings…
From $29.99
…parallel, perpendicular to the cabinet face, and also adjust for height. The Miller FastBlock replaces the commonly used "block of wood" or fixed spacer with an adjustable drawer guide mounting system. Simply hold the Miller FastBlock on the back side of the face frame, adjust the block flush with the…
$1.99
…creating flush, miter, face type, t-type and edge-to-edge lamination joints using 3/8" dowels. Additionally, using simple shop made spacers, or precision machined spacers (2 included with the Dowelmax Jr), the jig can be adjusted to complete offset joints. The Jr. is fully compatible with, and upgradeable…
$99.00
…adjusted. Set-up has never been easier or more precise. The new POWERMATIC® 701 Benchtop Mortiser features an integrated bit and chisel spacer system. These two spacers are used to accurately and quickly account for the space needed between the bit and chisel during set-up. Large work surfaces in the table…
$489.99
…For even greater functionality, add the optional 1/4" drill guide package for use with 1/2" and 5/8" stock. With 1" thick work pieces, use a 1/8" spacer plate (also included with the 1/4" drill guide package).
$310.00
…natural-looking layout of your text. Kits are available in two different heights and include 99 template pieces (letters, numbers, symbols, and kerning spacers). Included brass guide bushing is a vast improvement over the plastic bushing that was included with previous Rockler Sign Making Templates. Recommended…
From $49.99
…-Adhesive Discs, or double stick tape (sold separately). Each Letters Kit includes a total of 40 letters with duplicates of common letters and three spacers. Each Numbers and Symbols Kit includes two each of 0-9 and 9 common symbols including @ and &. Requires the use of a plunge router that accepts standard…
From $22.99
…simply by unscrewing the top cutter andbearing of the rail bit from the lower cutter and shank. Create 1-3/4" joints forexterior doors or remove the spacers and narrow to 1-3/8" for interior doors.Includes coping cutter, stick cutter, wrenches, wood storage case, and FREEinstructional DVD.
$207.97
Decorative hardwood spacers, smoothly sanded and ready for finishing. Use on plate rails, spice racks, headboards and more. 8 per pack.
$3.99
…lengthsimply by unscrewing the top cutter and bearing of the rail bit from the lower cutterand shank. Create 1-3/4" joints for exterior doors or remove the spacers and narrowto 1-3/8" for interior doors. Includes coping cutter, stick cutter, wrenches, woodstorage case, and FREE instructional DVD.
$199.97
(0 Items)