T-Slots allow jigs to be moved to any position needed on the track.Cuts slots to fit standard T-Slot Bolts. Note: This bit does not cut Universal T-Tracks or slotwalls.3/8" Between Cutter & Shank
$29.99
…making your own slotwall! Note: Not intended to create T-slots for jigs. If that is your goal, try bit 26099.Carbide-tipped bit cuts 5/16" x 1-1/16" slot with 3/8" groove.Works best with MDF and soft woods.When working with hardwood, this bit requires a much lower rate of feed to eliminate burning and…
$34.99
…Laminate Router Tables are newly redesigned with a dual-track miter slot in the table and an included dust port. Plus, these packages include our acclaimed Router Lift FX for above-table adjustments and bit changes! New 3/4" T-profile miter slot allows you to use precision aftermarket miter gauges, while universal…
$399.99
…They have a smooth finish and rounded corners that make it easy to slide your T-slot stops to the mark without binding. Use them with our aluminum T-tracks or machine your own wooden T-tracks with our T-slot Router Bit (Rockler #26099). Lengths range from 1" to 3-1/2" (see below for selection).
From $1.19
Customize your own jigs. The T-heads fit inside T-slot track or a groove routed with T-slot bit #26099.Available in 5/16"-18 thread or 1/4"-20 thread.5/16" - 18 bolt bottom plates are 9/16"W x 7/8"L x 7/64"H. 1/4" - 20 bolt bottom plates are 9/16"W x 11/16"L x 7/64"H. Zinc-plated steel.Sold in packs…
From $3.99
…A quick-release lever allows fast speed and belt changes. The extruded aluminum fence has several T-slots so you can mount a wood face to create a no-clearance surface around any shaper or router bit. The fence also gives you the ability to quickly move the fence close to its final position, lock it…
$3,879.99
…are limited! Offer valid while supplies last! Not available in stores.An incredible value with an assortment of 47 driver bits, including 14 premium cold forged Torsion bits. Bit set includes, among others, phillips, flathead, torx, square-drive, sockets and a handy flip-out case. Don't miss out!
(Reg. $26.29)
Now $14.99
SAVE 42% TODAY!
…Value!)20 3D models, font and graphic package providedExtended Aluminum T slot top (28-1/2" x 36") for more versatile clampingPrecision lead Screws with anti backlash on all axisIncludes V-Carve 7.0 software, 1/2" dia. V-groove Bit and two hold-down clamps! Bring the speed and precision of computer-controlled…
$3,799.99
…A quick-release lever allows fast speed and belt changes. The extruded aluminum fence has several T-slots so you can mount a wood face to create a no-clearance surface around any shaper or router bit. The fence also gives you the ability to quickly move the fence close to its final position, lock it…
$3,674.99
…Tables are newly redesigned with a dual-track miter slot in the table and an included dust port. Plus, these packages include a steel stand, and our acclaimed Router Lift FX for above-table adjustments and bit changes! New 3/4" T-profile miter slot allows you to use precision aftermarket miter gauges…
$499.99
…slot allows you to use precision aftermarket miter gauges, while universal T-tracks in both the fence and table accept stops, hold-downs and more. Included aluminum Pro Fence features two adjustable white melamine MDF faces, front- and rear-facing accessory T-tracks and an included dust port and bit…
$499.99
…slot allows you to use precision aftermarket miter gauges, while universal T-tracks in both the fence and table accept stops, hold-downs and more. Included aluminum Pro Fence features two adjustable white melamine MDF faces, front- and rear-facing accessory T-tracks and an included dust port and bit…
$399.99
…enhances visibility. These packages include our Steel Stand and the acclaimed Router Lift FX for effortless above-table adjustments and bit changes. 3/4" T-profile miter slot allows you to use precision aftermarket miter gauges, while universal T-tracks in both the fence and table accept stops, hold-downs…
$649.99
…The whiter, brighter finish enhances visibility, while the included Router Lift FX allows effortless above-table adjustments and bit changes. 3/4" T-profile miter slot allows you to use precision aftermarket miter gauges, while universal T-tracks in both the fence and table accept stops, hold-downs…
$549.99
…spacing for 2-1/2", 3", 3-1/2", 3-3/4", 4" and 96mm.Includes 24" aluminum T-slot bar, left to right self-adhesive tape measure, stop block for repetitive drawer pull alignment, and automatic center punch for perfect drill bit alignment every time.
$39.99
…features two hold-down slots for securing work anywhere along the length of the table. The unit comes with two hold-down clamps (additional hold-downs are available separately). It is fully compatible with the Bosch Colt Palm Router and includes a 1/2" diameter V-groove router bit. The CNC Shark also includes…
$2,899.99
…A quick-release lever allows fast speed and belt changes. The extruded aluminum fence has several T-slots so you can mount a wood face to create a no-clearance surface around any shaper or router bit. The fence also gives you the ability to quickly move the fence close to its final position, lock it…
$3,879.99
(0 Items)