…In addition, they have a wide aluminum body, allowing for maximum tension. Clamps include a 5-star knob and a 5/16" T-bolt designed to fit into T-tracks on drill presses, router tables and more.The Hold Down Clamp, 5-1/2"L x 3/4"W provides the same great features as the 5-1/2"L x 1-1/8"W version, but…
$10.99
…fixture in yourshop for years to come. Available in two thread sizes (1/4"-20 or 5/16"-18). T-boltsin both kits will fit all Rockler Universal T-Tracks. Click "More Info" tab to see complete content list.
$69.99
…finish and rounded corners that make it easy to slide your T-slot stops to the mark without binding. Use them with our aluminum T-tracks or machine your own wooden T-tracks with our T-slot Router Bit (Rockler #26099). Lengths range from 1" to 3-1/2" (see below for selection).
From $1.19
Complete measuring system for your miter saw, radial arm saw or drill press is faster and more accurate than putting a pencil mark on every board!Just set precision lens cursor to desired length and place board against stop - you're ready to cut to length.
$124.00
Build your own jigs with our JIG IT hardware value pack. Assorted T-bolts, knobs, and inserts for customizing your own jigs and fixtures for your shop.
$31.99
…yourself saying, "I could use this for something," right before you throw it in the trash? The clear vinyl tubes we use to package long items like T-Tracks and Miter Bars are a perfect example! Use them as storage containers for screws, dowels and moreEasily cut to length with a hacksawClear material makes…
$4.99
…router tables, drill presses and more. These 5-Star Knobs are available with a through-hole and threaded insert for use with a T-bolt and T-slot or T-track, or with a 1" threaded stud. Choose from three different threadings below.
$1.99
…, pre-finished panels, or anything that's already been prep sanded. Includes a 4-star knob, washer and a 5/16" x 3" T-bolt designed to fit into T-tracks on drillpresses, router tables and more.
(Reg. $4.99)
Now $3.99
SAVE 20% TODAY!
…-coated MDF fence faces with routed T-slots for mounting featherboards and more, plus two top-mounting aluminum Universal T-tracks that will equip your fence to handle any accessory with 5/16" T-bolts, 1/4" T-bolts, and 1/4" hex bolts. (Fence not included).
$33.99
Customize your own jigs. The T-heads fit inside T-slot track or a groove routed with T-slot bit #26099.Available in 5/16"-18 thread or 1/4"-20 thread.5/16" - 18 bolt bottom plates are 9/16"W x 7/8"L x 7/64"H. 1/4" - 20 bolt bottom plates are 9/16"W x 11/16"L x 7/64"H. Zinc-plated steel.Sold in packs…
From $3.99
This durable aluminum auxiliary track is perfect for shop-made fences, or anywhere you might run a variety of bolt-in-track accessories. It features Bench Dog's innovative Universal T-track, which accepts 1/4" and 5/16" T-bolts as well as 5/16" hex bolts. Mounting hardware not included.
$20.99
…will not mar your workpiece. The exclusive built-in setup feather makes setting the tension fast, easy, and repeatable. Slides quickly into 1/4" T-tracks, featured on all Bench Dog Tools fences, as well as most Rockler fences. Sold as a pair. Optional Miter Slot Adapter (sold separately) allows you to…
From $11.59
…right out of the box.The table includes a Dual Track combining a standard miter track for miter gauges, and a Universal T-track for either 5/16" T-bolts or 1/4" hex bolts for custom made jigs and featherboards. The fence also includes Universal T-tracks for mounting feather boards, stops, and other jigs…
$249.99
…Track device? These tape measure inserts fit any universal T-Track (up to 48" in length) to give you accurate measurements to 1/16" along your fence for on the fly adjustments and more. Use for setting up fence measurement from the edge of your blade or cutter.Ideal for use with all Universal T-Tracks,…
From $10.99
This combo package includes a 48" length of our new anodized aluminum Universal T-track, plus two hold down clamps (each including one hold down, one 3" T-bolt, and one 5-star knob). Additional hold downs are available separately below. This kit makes a great addition to our Drill Press Table!
$34.99
…construction in a slightly slimmer design, without the non-marring rubber tips. The Clamps include a 5-star knob and a T-bolt designed to fit into T-tracks on drill presses, router tables and more.The Hold Down Clamp, 5-1/2"L x 1-1/8"W provides the same great features as this version, but is wider and…
$7.99
Make your own jigs and hold-downs!Excellent for attaching featherboards, hold-downs and special jigs to your table saw, router table, disc sander or any other tool with a standard 3/4" wide x 3/8" deep miter gauge slot.
$7.99
…your Multi Tracks with these extruded aluminum brackets to form L-shapedfences. Center slots accept T-bolts (not included) to connect Multi Tracks to any built-inT-Track. Includes two brackets, eight 1/4"-20 bolts, eight washers, and eight T-Tracknuts to secure brackets to Multi Tracks (35605, 34262…
$19.99
Mounts to any 3/4" fence to give you two universal T-Tracks parallel to your tablesurface. Pre-drilled holes make installation to any subfence easy. Made for use withFlip Stops (26991 and 31214) and T-Track Tape Measures (31193 and 32893). Made ofextruded aluminum. 36" length.
$32.99
This package includes all the essential building blocks, plus the plans for 5 useful workshop jigs. Warm up with the disc sander jig or the squaring jig for fast results. Then try the coping sled for clean, square rail-ends, throw the crosscut sled together for angled cuts on the table saw or build…
$146.99
…a T-track. Just mount a toggle clamp to the plate, then affix the whole assembly to any T-track on the market. Use it to get the most out of your toggle clamps and any workbenches, tables, jigs or surfaces with T-tracks. It's a great way to add a hold-down to fences with top mounted T-tracks. The steel…
$7.99
Take the guesswork out of coping crown molding to create perfect inside corners!Allows you to quickly and easily cope crown molding with a power jig saw instead of a coping saw, reducing wrist, hand and arm stress.
$47.99
…machine tables with the ultimate accessory track! Universal T-Track boasts a unique stacked-slot design that allows you to attach any accessory with 1/4" T-bolts, 5/16" T-bolts, or 1/4" Hex-bolts. With this full-service kit you get: One 4' length of Universal T-Track Two 3-1/2" x 5/16" T-bolts Two 1…
(Reg. $31.99)
Now $24.99
SAVE 21% TODAY!
Exclusive cam clamps give you quick release for clamping jigs and fixtures. Choose from 1/4"-20 or 5/16"-18; for use with any respective 1/4"-20 or 5/16"-18 threaded/hex bolt or T-bolt.
$9.99
(0 Items)
