Customize your own jigs. The T-heads fit inside T-slot track or a groove routed with T-slot bit #26099.Available in 5/16"-18 thread or 1/4"-20 thread.5/16" - 18 bolt bottom plates are 9/16"W x 7/8"L x 7/64"H. 1/4" - 20 bolt bottom plates are 9/16"W x 11/16"L x 7/64"H. Zinc-plated steel.Sold in packs…
From $3.99
…. These T-bolts have smooth, clean threads for spin-on, spin-off ease when making adjustments to your woodworking jigs and fixtures. They have a smooth finish and rounded corners that make it easy to slide your T-slot stops to the mark without binding. Use them with our aluminum T-tracks or machine…
From $1.19
…makes Star or T-Knobs impractical. Features a push button ratchet clutch. Hold button down and pull up on lever to release clutch. Zinc plated steel bolt is 1" long.
$4.99
…with soft woods, pre-finished panels, or anything that's already been prep sanded. Includes a 4-star knob, washer and a 5/16" x 3" T-bolt designed to fit into T-tracks on drillpresses, router tables and more.
(Reg. $4.99)
Now $3.99
SAVE 20% TODAY!
…and accuracy. In addition, they have a wide aluminum body, allowing for maximum tension. Clamps include a 5-star knob and a 5/16" T-bolt designed to fit into T-tracks on drill presses, router tables and more.The Hold Down Clamp, 5-1/2"L x 3/4"W provides the same great features as the 5-1/2"L x 1-1/8…
$10.99
Our Universal T-track features a unique "stacked" T-slot that accepts both 5/16" T-bolts and 1/4" T-bolts, as well as 1/4" Hex-bolts. This means you can use all the hardware and T-track accessories from your old jigs in addition to the newer style hardware. The T-tracks are available in 2 ft, 3 ft,…
From $14.99
…aluminum auxiliary track features Bench Dog's innovative Universal T-track, which has a unique stacked-slot design that accepts any accessory with 1/4" T-bolts, 5/16" T-bolts, or 5/16" hex bolts. Perfect for tables, fences, and even jigs. In addition to the Universal T-track, Dual-Track also includes a…
From $14.99
…fixture in yourshop for years to come. Available in two thread sizes (1/4"-20 or 5/16"-18). T-boltsin both kits will fit all Rockler Universal T-Tracks. Click "More Info" tab to see complete content list.
$69.99
…routed T-slots for mounting featherboards and more, plus two top-mounting aluminum Universal T-tracks that will equip your fence to handle any accessory with 5/16" T-bolts, 1/4" T-bolts, and 1/4" hex bolts. (Fence not included).
$33.99
…just like the metal version - ideal for everything from jewelry boxes to cabinets.Just combine your #25971 Incra Jig positioner or #24981 Incra Lead Screw 17" Fence System with the HingeCrafter drill guide and the results will be beautiful wood hinges ready to glue right into your project.
$83.99
…fixtures, router tables, drill presses and more. These 5-Star Knobs are available with a through-hole and threaded insert for use with a T-bolt and T-slot or T-track, or with a 1" threaded stud. Choose from three different threadings below.
$1.99
Build your own jigs with our JIG IT hardware value pack. Assorted T-bolts, knobs, and inserts for customizing your own jigs and fixtures for your shop.
$31.99
This durable aluminum auxiliary track is perfect for shop-made fences, or anywhere you might run a variety of bolt-in-track accessories. It features Bench Dog's innovative Universal T-track, which accepts 1/4" and 5/16" T-bolts as well as 5/16" hex bolts. Mounting hardware not included.
$20.99
…you quick release for clamping jigs and fixtures. Choose from 1/4"-20 or 5/16"-18; for use with any respective 1/4"-20 or 5/16"-18 threaded/hex bolt or T-bolt.
$9.99
…, the Magswitch Track is truly universal. It accommodates all hardware on the market. Make your own Jigs, fixtures, stops, fences, zero clearance fences and more! Mounts to miter gauges and fences as well. Accepts all standard mounting hardware! One side accepts all standard T bolts and all 1/4" hex…
From $31.49
…Rockler have a pleasant textured surface and a threaded insert made of brass. The hole runs all the way through the knob, so there's no risk of the T-bolt bottoming out on the plastic. Choose from two different thread patterns below.
From $1.89
T-Slots allow jigs to be moved to any position needed on the track.Cuts slots to fit standard T-Slot Bolts. Note: This bit does not cut Universal T-Tracks or slotwalls.3/8" Between Cutter & Shank
$29.99
…handy knobs. Textured knob edge provides excellent grip to hand tighten or loosen your setups. Choose from knobs which include a threaded insert or a bolt according to your needs.
From $1.89
…total flatness, as well as Universal T-Tracks on both the front and back of the aluminum spine. These tracks, which are perfect for attaching featherboards, stops, hold-downs, and more, accept any accessory with 1/4" t-bolts, 5/16" hex-bolts, and 1/4" hex bolts. On top of two adjustable MDF faces, the…
$159.99
…length of Universal T-Track Two 3-1/2" x 5/16" T-bolts Two 1" x 5/16" T-bolts Two 1-1/2" x 5/16" T-bolts Two 2-1/2" x 5/16" T-bolts Four T-knobs Four 5-star knobs Additional lengths of track are sold separately, below. For added versatility and functionality, combine T-Tracks with 5-1/2"L x 1-1/8"W…
(Reg. $31.99)
Now $24.99
SAVE 21% TODAY!
These 1" Round Knobs with Bolt are ideal for jigs, router tables, drill presses and other similar applications. They work great with our T-Slot System. Choose from threaded insert or 1" bolt.
From $1.99
…it and stays out of the way when you don't! Slides up and down any fence with a top-mounted T-track and locks down with a comfortable 1" diameter knob. 5/16" T-bolt fits both standard and Universal T-tracks. Also available: Rockler Flip Stop for 2-1/4" fences (31214).
$16.99
Marking screw holes becomes simple, quick and accurate! Creates absolutely accurate spacing for pull borings.
$19.99
…your Multi Tracks with these extruded aluminum brackets to form L-shapedfences. Center slots accept T-bolts (not included) to connect Multi Tracks to any built-inT-Track. Includes two brackets, eight 1/4"-20 bolts, eight washers, and eight T-Tracknuts to secure brackets to Multi Tracks (35605, 34262…
$19.99
…drill - a nice option when you don't have space for a drill press. Since your hinge mounting screws serve double-duty as clamps, setup is simple. Just screw it on, rout and repeat! Can be adjusted for either 3mm or 5mm tabs. Designed for Blum hinges. Use with the 5/8" Short-Shank Guide Bushing, (specially…
$17.99
(0 Items)