Well-made T-slot bolts can make the difference between a jig that is a pleasure to use, and one that is downright frustrating. These T-bolts have smooth, clean threads for spin-on, spin-off ease when making adjustments to your woodworking jigs and fixtures. They have a smooth finish and rounded corners…
From $1.19
Customize your own jigs. The T-heads fit inside T-slot track or a groove routed with T-slot bit #26099.Available in 5/16"-18 thread or 1/4"-20 thread.5/16" - 18 bolt bottom plates are 9/16"W x 7/8"L x 7/64"H. 1/4" - 20 bolt bottom plates are 9/16"W x 11/16"L x 7/64"H. Zinc-plated steel.Sold in packs…
From $3.99
…unique stacked-slot design that allows you to attach any accessory with 1/4" T-bolts, 5/16" T-bolts, or 1/4" Hex-bolts. With this full-service kit you get: One 4' length of Universal T-Track Two 3-1/2" x 5/16" T-bolts Two 1" x 5/16" T-bolts Two 1-1/2" x 5/16" T-bolts Two 2-1/2" x 5/16" T-bolts Four T-knobs…
(Reg. $31.99)
Now $24.99
SAVE 21% TODAY!
Our Universal T-track features a unique "stacked" T-slot that accepts both 5/16" T-bolts and 1/4" T-bolts, as well as 1/4" Hex-bolts. This means you can use all the hardware and T-track accessories from your old jigs in addition to the newer style hardware. The T-tracks are available in 2 ft, 3 ft,…
From $14.99
T-Slots allow jigs to be moved to any position needed on the track.Cuts slots to fit standard T-Slot Bolts. Note: This bit does not cut Universal T-Tracks or slotwalls.3/8" Between Cutter & Shank
$29.99
…on fixtures, router tables, drill presses and more. These 5-Star Knobs are available with a through-hole and threaded insert for use with a T-bolt and T-slot or T-track, or with a 1" threaded stud. Choose from three different threadings below.
$1.99
…your Multi Tracks with these extruded aluminum brackets to form L-shapedfences. Center slots accept T-bolts (not included) to connect Multi Tracks to any built-inT-Track. Includes two brackets, eight 1/4"-20 bolts, eight washers, and eight T-Tracknuts to secure brackets to Multi Tracks (35605, 34262…
$19.99
…T-track, which has a unique stacked-slot design that accepts any accessory with 1/4" T-bolts, 5/16" T-bolts, or 5/16" hex bolts. Perfect for tables, fences, and even jigs. In addition to the Universal T-track, Dual-Track also includes a standard 3/4" x 3/8" slot for miter gauges. Mounting hardware not…
From $14.99
…featherboard can be used in both infeed and outfeed applications. The featherboard mounts with the included heavy duty T-bolts and large, easy-to-grip threaded knobs. Fits all Rockler T-slot fences and can be used with material up to 1-1/8" thick.
$16.99
Quantities are limited! Offer valid while supplies last! Not available in stores.An incredible value with an assortment of 47 driver bits, including 14 premium cold forged Torsion bits. Bit set includes, among others, phillips, flathead, torx, square-drive, sockets and a handy flip-out case. Don't…
(Reg. $26.29)
Now $14.99
SAVE 42% TODAY!
These 1" Round Knobs with Bolt are ideal for jigs, router tables, drill presses and other similar applications. They work great with our T-Slot System. Choose from threaded insert or 1" bolt.
From $1.99
…Rail systems, Festool Screw Clamps secure your workpiece for precision cutting, sanding, routing, sanding, or just about any other application. Designed to work seamlessly with holes and channels on the the Festool MFT Multifunction table and can be inserted into bottom t-slot of Festool FS Guide Rails…
From $40.00
Rockler exclusive JIG IT template makes marking screw holes for knob and pull installation quick, simple and accurate.Offers spacing for 2-1/2", 3", 3-1/2", 3-3/4", 4" and 96mm.Includes 24" aluminum T-slot bar, left to right self-adhesive tape measure, stop block for repetitive drawer pull alignment…
$39.99
…16" melamine-coated MDF fence faces with routed T-slots for mounting featherboards and more, plus two top-mounting aluminum Universal T-tracks that will equip your fence to handle any accessory with 5/16" T-bolts, 1/4" T-bolts, and 1/4" hex bolts. (Fence not included).
$33.99
…Mounts to miter gauges and fences as well. Accepts all standard mounting hardware! One side accepts all standard T bolts and all 1/4" hex. The other side accepts all standard T bolts, all 5/16" and Kreg® clamps. Includes micro adjustable brackets for fine tuning to 90 degrees. Features core advantages…
From $31.49
…Guide Rail systems, Festool Screw Clamps secure your workpiece for precision cutting, sanding, routing, sanding, or just about any other application. Designed to work seamlessly with holes and channels on the Festool MFT Multifunction Table and can be inserted into bottom t-slot of Festool FS Guide Rails…
$40.00
(0 Items)