This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to 2-3/4" thick…
From $38.47
…one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features…
From $71.47
…for effective chip clearance. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this combination blade, there is no need for stabilizers. The Perma-SHIELD coating covers the blade plate and cutting edge in a protective…
From $49.97
With a unique triple chip tooth design, this 10" blade leaves extremely smooth, true surfaces for glue and finish work. Ideal for ripping hard and soft woods 1/8" to 1" thick.
$59.97
Using advanced technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates…
From $54.97
…-step finishing (jointing and sanding not required).For another option in the Forrest Woodworker II series, check out the Thin Kerf General Purpose Blade.
$120.79
…coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.
From $68.47
…while maintaining excellent finish quality on crosscuts. The blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from lower-powered portable machines to high-end cabinet saws.
$44.99
Freud Industrial Series Teflon-coated saw blade. Produces exceptionally clean cuts in veneered plywood and melamine.
From $94.47
This blade gives smooth, fast rips in hardwoods and softwoods. The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut. These blades are precision balanced and can be used in gang-rip operations. The ideal working range is from 3/4" to 2-3…
From $57.47
…blade does it all. Whether you're ripping or crosscutting, a Premier Fusion blade will tackle any project.The Perma-SHIELD coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD blades resist binding in large volume cutting, reducing subsequent blade…
$99.97
This blade's specially designed triple chip tooth design produces extremely smooth, true surfaces for gluing and finish work. There is no need for sanding or jointing after the cut. The ideal working range is from 1/8" to 1" thick. This blade also features laser cut anti-vibration slots, practically…
From $69.97
…cut. One blade does it all. Whether you're ripping or crosscutting, a Premier Fusion blade will tackle any project. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.The Perma-SHIELD coating covers the blade plate and cutting…
$79.97
Make perfect flat-bottom cuts! Affordable saw blade and dado set features full-size chippers for easier setup and less chance of wobble or vibration. With C-4 industrial quality carbide tips. Ideal for all types of dimensioned lumber, plywood, soft wood, hard wood, artificial and processed woods, and…
$83.99
…Perma-SHIELD blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to spin freely, and eliminates pitch and debris build-up on the blade. The LU86R blade is also available for Festool, DeWalt, and Makita track saws.
From $40.97
Specially designed blades for chop saws, sliding compound miter saws, and radial arm saws.
From $114.99
The long distance runner!Thin kerf and #400 grit diamond ground teeth for fast, clean cuts.
$29.99
…segments? Now you can take the guesswork out of your next setup! Set of seven angle blocks allow you to quickly and accurately set up your miter gauge or blade angle to cut precise segmented bowl pieces.Compare to aluminum angle blocks that cost $100 more!Includes 45 block (for 4 segments), 30 (6 segments)…
$29.39
…outside blades with three two wing chippers. This makes it ideal for underpowered saws because it requires less power to feed. Freud's stacked dado set allows you to obtain a perfect fit on shelving, joints, tongue and groove, and more. May be used with most 10" table and radial arm saws. This resharpenable…
From $86.47
…finish. No scoring blades needeed with this blade! The Perma-SHIELD coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD blades resist binding in large volume cutting, reducing subsequent blade warp. The coating lubricates the blade, allowing it to…
From $68.97
…tooth geometry make chipout problems a thing of the past. The blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from lower-powered portable machines to high-end cabinet saws.
$69.99
…increments and doubles the number of slot widths available. A shim set is also included with the dado set for fine adjustments. Use on all table saws, and radial arm saws for cutting slots, grooves, dadoes, and rabbets in softwood or hardwood. SD506 is 6" in diameter, and SD508 is 8" in diameter. Both include…
From $183.47
Make perfect flat-bottom cuts! Affordable saw blade and dado set features full-size chippers for easier setup and less chance of wobble or vibration. With C-4 industrial quality carbide tips. Ideal for all types of dimensioned lumber, plywood, soft wood, hard wood, artificial and processed woods, and…
$104.99
…last!This twin pack of Freud blades includes a 24T General Purpose Blade for ripping and dimensioning, and an 80T Ultra-Fine Crosscut Blade for the fine finishing cuts on intricate molding and joinery. Both blades feature thin-kerf technology, which is less taxing on your saw, and generates less waste.…
(Reg. $119.99)
Now $79.99
SAVE 33% TODAY!
This thin kerf table saw blade produces smooth as sanded rips and crosscuts in hardwoods up to 2" thick. For another option in the Forrest Woodworker II series, check out the ATB General Purpose Blade.
$114.99
(0 Items)