…veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needed with this blade! The Silver…
$94.97
…technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts…
From $54.97
Freud Industrial Series Teflon-coated saw blade. Produces exceptionally clean cuts in veneered plywood and melamine.
From $94.47
…veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needed with this blade! The Perma…
From $90.47
You'll get faster feed rates plus absolute splinter control- even on Oak/Birch ply veneers and melamine! Gives you refined cuts every time.
$175.99
…blade does it all. Whether you're ripping or crosscutting, a Premier Fusion blade will tackle any project.The Perma-SHIELD coating covers the blade plate and cutting edge in a protective layer, reducing heat build-up. Perma-SHIELD blades resist binding in large volume cutting, reducing subsequent blade…
$99.97
…one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features…
From $61.97
…one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features…
From $71.47
This fast-cutting blade is ideal for a perfect finish on one side of laminates and melamines. The Perma-SHIELD® coating makes these blades resistant to friction and heat build-up. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. The 10 hook angle and a triple chip…
From $85.97
…veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needeed with this blade! The Perma…
From $68.97
…coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.
From $69.47
…for effective chip clearance. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this combination blade, there is no need for stabilizers. The Perma-SHIELD coating covers the blade plate and cutting edge in a protective…
From $49.97
…technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts…
$52.47
This blade is ideal for sizing sheet goods (chipboard, plywood, laminates, MDF) where speed is more important than a smooth finish or when cutting stacks of material. These blades are best used when cutting plywood and composition material, but they can also be used with hardwood and softwood. The Silver…
From $61.97
…No scoring blades needeed with this blade! Freud has customized their LU96R blade especially for track saws, giving this blade extra negative hook angle. The -5 hook angle allows for a smooth, easy cut with a handheld saw. At 160mm in diameter, this blade will fit the Festool TS-55 saw family, the DeWalt…
$65.97
…coating helps resist heat build-up up to two times longer than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.
From $62.97
…dado to handle today's undersized plywood. This allows the cut width to be adjusted in 1/32" increments and doubles the number of slot widths available. A shim set is also included with the dado set for fine adjustments. Use on all table saws, and radial arm saws for cutting slots, grooves, dadoes,…
From $183.47
Make perfect flat-bottom cuts! Affordable saw blade and dado set features full-size chippers for easier setup and less chance of wobble or vibration. With C-4 industrial quality carbide tips. Ideal for all types of dimensioned lumber, plywood, soft wood, hard wood, artificial and processed woods, and…
$83.99
Make perfect flat-bottom cuts! Affordable saw blade and dado set features full-size chippers for easier setup and less chance of wobble or vibration. With C-4 industrial quality carbide tips. Ideal for all types of dimensioned lumber, plywood, soft wood, hard wood, artificial and processed woods, and…
$104.99
Cut virtually chip-free through veneered plywood, melamine, and laminates with this 7-1/4" blade! Features Freud's TiCo Hi-Density Carbide and Titanium craftsmanship for long life and a flawless finish with every cut.7-1/4" blade with 5/8" arbor
$54.97
This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to 2-3/4" thick…
From $38.47
…cuts from 3/16" to 13/16" with the easy-to-use Oldam 7" Adjustable Dado Blade! Fits most full-size 8", 9", and 10" table saws with a 5/8" arbor and has 16 precision-sharpened carbide tips that cut through hardwood, softwood, plywood, wood composites, and melamine with ease. And Oldham's adjustable hub…
(Reg. $39.99)
Now $14.99
SAVE 62% TODAY!
…from plywood to melamine with the Avenger 8" x 42 Tooth Stack Dado Set! Gives you a chip-free finish and a true flat-bottomed groove. Set includes two 8" diam. x 42 tooth outside blades with 5/8" arbors, five chippers and an 8-pc. shim set for custom dado thicknesses. May be used with most 10" table and…
(Reg. $89.99)
Now $69.99
SAVE 22% TODAY!
(0 Items)