Straight, angled or mitered tenons - this jig cuts it!Safety, accuracy and repeatability are the hallmarks of this heavy-duty tenoning jig. Designed to fit any table saw with a 3/4" X 3/8" miter groove, this jig will hold your stock in precise position. The adjustable back stop will support stock from…
$117.99
…with the innovative, labor-saving Leg Up Table Saw Panel-Lifter! Easily mounts to your table allowing you to raise sheet goods onto your table saw. Simply place any sheet of wood into the hook and, in one controlled motion, flip the sheet onto your table saw. In one easy motion you're ready to cut large…
$39.99
…jig allows you to rip thin strips on the left side of the blade, eliminating the danger of pushing narrow strips between the saw and fence. Since the strip is not trapped between the blade and fence, there is also less risk of binding and kickback. It's simple to use; a single knob locks the jig into…
(Reg. $26.99)
Now $19.99
SAVE 25% TODAY!
Being able to cut materials safely and precisely on your table saw is essential for fast and accurate Woodworking.
From $329.99
This scaled-down version of our full-sized sled fits onto smaller table saws for precisecuts wherever you're working. A large protractor scale at the end of the fence letsyou precisely tune angles for air-tight miters and crosscuts no more squinting.Features smooth-sliding no-slop ball bearings, a solid…
$119.99
…thought possible! Special Edition miter gauge comes with sturdy telescoping fence and dual-arm Flip Shop Stop for accurate miter cuts on the table saw or router table.Precision angle indexing teeth are laser cut in solid steel to lock in 41 positive angle stops in 5° increments over a full 180° range,…
$159.99
Make fast, accurate adjustments in less than to your T-square style table saw fence.Allows for precise dadoes and a perfect fit every time.Three powerful rare earth magnets hold adjuster securely on front rail.Mounts and dismounts in seconds without tools.
$21.99
Positive stops at 0, 10, 22-1/2, 30 and 45 - and micro-adjustability to 1/100 - give you speed, repeatability and the same accuracy that machine shops strive for!Add to that the perfect, repeatable dimensions you'll get from the precision flip stop, and you can say "goodbye" to mitered joint gaps…
$139.00
Combined with our Crosscut Sled (33113), this platform will provide true zero-clearance support on both sides of the blade for safe, splinter-free cuts. By keeping drop-off pieces from sagging at the end of the cut, it prevents them from splitting off unpredictably, and from getting jammed in the…
$34.99
Cut custom coves on your table saw without juggling all those fences and clamps! This jig includes everything you need for safe, easy coving in one easy-to-use package. Accepts stock up to 7" wide and 1-1/2" thick, enabling you to cut huge crown moldings that would cost a fortune from the lumberyard…
$89.99
…repeatability! Extruded aluminum miter bar has adjustable aluminum runner for perfect sliding action and can be locked in place for stationary table saw and router table jigs.Available in 24" and 18" lengths.Works with any standard 3/8" x 3/4" miter slot.
From $18.59
Some of the pickiest machining operations require a jig that won't lift or tip in the slightest, and that's where the new Rockler Dovetail Miter Bar excels. With its 14 wedge-shaped profile, it holds your jig firmly to the work surface for precision, consistency and repeatability where lifting is a…
From $16.99
…the plans for 5 useful workshop jigs. Warm up with the disc sander jig or the squaring jig for fast results. Then try the coping sled for clean, square rail-ends, throw the crosscut sled together for angled cuts on the table saw or build the tenoning jig for crisp tenons in almost no time. The choice is…
$146.99
No more squinting at those tiny scales - this Crosscut Sled'slarge protractor scale lets you precisely tune your angles for air-tight miters and crosscuts. Easy-to-read 1/2 graduations and a hair-line indicator ensure error-free setups, while a heavy-duty aluminum fence, adjustable MDF fence face,…
$139.99
Perfect miters - no adjustments! Simply cut one piece on the leading face, one on the trailing face, and voilà! Since both pieces reference off a perfect 90 angle, the miters will fit perfectly.
$25.99
Set up your jigs for smooth-sliding action on table saws, router tables, workbenchesand more! These solid aluminum bars have nylon set screws in the miter bar thatadjust in or out for a perfect fit in any standard 3/4" x 3/8" miter slot. Availableindividually in 18" or 24" lengths.
From $19.99
Our "Perfect Miter" attachment is designed to support the mitered end of a board so that the sharp point of the miter is not damaged while cutting. The attachment also allows the mitered end to be measured off of two points of contact instead of the toe of the miter, creating increased accuracy. A…
$22.49
The ultimate miter cutting workstation for the table saw!Three-panel miter sled with patented Incra incremental angle control delivers perfect, repeatable accuracy. Includes 36"-64" telescoping miter fence and dual flip stop.With 364 precision indexed angle stops over +/-90° to produce perfect, gap…
$299.99
…crosscut range up to 24" and eliminates all side play to improve your miter gauge's performance.True zero-clearance tearout control on both sides of the table.Works with any brand of miter gauge. Miter gauge not included.
$159.99
Works great for table saws, band saws, cutoff saws, router fences and more! These compact, lightweight Fence Clamps allow you to secure a huge variety of shop-made auxiliary fences to your existing fences without having the clamp interfere with your work. The clamp arm simply fits into a 3/8" hole in…
(Reg. $19.49)
Now $14.99
SAVE 23% TODAY!
Achieve absolute precision at any angle! This high definition gauge has 180 positivestops for pin-point accuracy at every degree (with special stops at +/-22.5), plus amicro-adjustable vernier scale for fine-tuning to 1/10. Add to that the industry'ssmoothest adjustable miter bar, a telescoping…
$189.99
…accessory secures to smaller table saws, providing zero-clearance workpiecesupport for safe, splinter-free cuts. The 1/2" thick MDF platform features a smoothslidingmelamine surface and a locking aluminum miter bar. Use only with our Crosscut Sled for Portable Table Saws.
$28.99
…This multi-purpose digital height gauge is accurate to within 0.001". It can be used to set the exact height of your blade or bit on the table saw, router table and a host of other machines. You can raise the gauge to the desired height and raise the blade to match, or you can set the caliper on the…
$64.99
Enjoy absolute accuracy and tight-fitting, low-friction operation with this premiummiter gauge. Laser-cut AngleLOCK stops in 1 increments from +/- 60 (plus specialstops at +/- 22.5) give you ultra-fine precision across the board, while a GlideLOCKmiter bar adjusts for a no-slop fit in any standard…
$84.99
|
Need Help? |
(0 Items)
