This heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may occur…
From $40.97
This thin kerf table saw blade produces smooth as sanded rips and crosscuts in hardwoods up to 2" thick. For another option in the Forrest Woodworker II series, check out the ATB General Purpose Blade.
$114.99
…produces smooth crosscuts in hardwoods, softwoods and moldings. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results. The Perma-SHIELD coating…
From $49.47
…ripping and dimensioning, and an 80T Ultra-Fine Crosscut Blade for the fine finishing cuts on intricate molding and joinery. Both blades feature thin-kerf technology, which is less taxing on your saw, and generates less waste. Laser-cut bodies with expansion slots remain flat and stay sharp longer. Micro…
(Reg. $119.99)
Now $79.99
SAVE 33% TODAY!
With a unique triple chip tooth design, this 10" blade leaves extremely smooth, true surfaces for glue and finish work. Ideal for ripping hard and soft woods 1/8" to 1" thick.
$59.97
This thin kerf blade produces glass smooth surfaces when crosscutting hardwoods and softwoods, thanks to Freud's unique side grinding technology. The larger blades are ideal for miter box applications. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower…
From $57.47
This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to 2-3/4" thick…
From $38.47
The LU96R is a thin kerf blade that is designed to give long life and exellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in…
From $68.97
The LU96R is a thin kerf blade that is designed to give long life and exellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in…
$65.97
This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to 2-3/4" thick…
$32.97
The ultimate combination blade is now available in a thin kerf design with Freud's LU83R. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration…
From $49.97
Designed to give long life and excellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates.…
From $90.47
Using advanced technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates…
From $54.97
…concert to provide the ultimate cut. One blade does it all. Whether you're ripping or crosscutting, a Premier Fusion blade will tackle any project. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.The Perma-SHIELD coating…
$79.97
…thousands on an inch. This will virtually eliminate any chance of kickback on the table saw and greatly reduce the chance of severing fingers. For Thin Kerf, range of 0.090"-0.118"The splitters are simple to install and simple to use. We include an easy to follow drill-guide template to install the SteelPro…
$39.99
Designed to give the cleanest cuts with a minimum of waste, this Thin Kerf Parting Tool features a 1-1/4" blade width that eliminates the flexing and twisting associated with thin blades. The double-bevel HSS cutting face imparts fine parting lines to turnings. For a solid interface with the handle…
$34.69
…feed rates. Ends second-step finishing (jointing and sanding not required).For another option in the Forrest Woodworker II series, check out the Thin Kerf General Purpose Blade.
$120.79
…in hard and soft woods. The unique raker tooth design allows for perfectly flat-bottomed cuts in grooving applications. The blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from lower-powered portable machines to high-end cabinet saws…
$54.99
A top-quality thin kerf general purpose blade that's perfect for general purpose cutting on non-sliding miter saws and table saws under 3HP. Thin kerf saves wood loss on each cut and reduces power drain on your saw. This blade will give you scratch free and polished cuts on stock up to 2" thick.
$131.99
This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5 negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus requiring…
From $63.97
Cut virtually chip-free through veneered plywood, melamine, and laminates with this 7-1/4" blade! Features Freud's TiCo Hi-Density Carbide and Titanium craftsmanship for long life and a flawless finish with every cut.7-1/4" blade with 5/8" arbor
$54.97
This blades features micro-grain C3 tungsten carbide tips for long life, and #400 grit diamond-ground teeth for fast, clean cuts. The thin kerfs mean less waste and less work for your saw, and fully hardened plates keep the blades running truer, longer. Features specially engineered heat vents to reduce…
$52.49
…Top Bevel), allowing the blade to cut alternately to the left and right, generating a more efficient and cleaner cut in all types of wood. This thin-kerfed blade design meets less resistance, for more efficient cutting, and produces less material waste. Laser cut expansion slots reduce vibration for…
$115.00
The long distance runner!Thin kerf and #400 grit diamond ground teeth for fast, clean cuts.
$29.99
This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5 negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus requiring…
From $55.47
|
Need Help? |
(0 Items)