This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to 2-3/4" thick…
From $38.47
This thin kerf table saw blade produces smooth as sanded rips and crosscuts in hardwoods up to 2" thick. For another option in the Forrest Woodworker II series, check out the ATB General Purpose Blade.
$114.99
…cut. One blade does it all. Whether you're ripping or crosscutting, a Premier Fusion blade will tackle any project. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.The Perma-SHIELD coating covers the blade plate and cutting…
$79.97
…with a minimum of waste, this Thin Kerf Parting Tool features a 1-1/4" blade width that eliminates the flexing and twisting associated with thin blades. The double-bevel HSS cutting face imparts fine parting lines to turnings. For a solid interface with the handle, the blade is seated and riveted a full…
$34.69
This thin kerf blade produces glass smooth surfaces when crosscutting hardwoods and softwoods, thanks to Freud's unique side grinding technology. The larger blades are ideal for miter box applications. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower…
From $57.47
…desired, the Irwin Marples Ultra-Smooth Cross-Cutting Saw Blade more than makes the cut. 80 teeth boasting a HI-ATB tooth geometry ensure crisp kerfs and minimal saw marks, even in the most delicate materials. The blade also features a thin kerf design, which reduces dust and material waste, and allows…
$59.99
This heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may occur…
From $40.97
This thin kerf, heavy-duty, non-ferrous metal cutting blade produces an excellent finish. These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life. Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray…
From $62.47
With a unique triple chip tooth design, this 10" blade leaves extremely smooth, true surfaces for glue and finish work. Ideal for ripping hard and soft woods 1/8" to 1" thick.
$59.97
This 50-tooth combination blade features mid-size hook teeth with extra-deep gullets every five teeth. This allows efficient chip ejection during rip cuts, while maintaining excellent finish quality on crosscuts. The blade also features a thin kerf design, which reduces dust and material waste, and…
$44.99
The ultimate combination blade is now available in a thin kerf design with Freud's LU83R. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration…
From $49.97
This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5 negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus…
From $63.97
40 rugged, razor-sharp carbide teeth and an ATB grind make the Irwin Marples 10" 40T Saw Blade a great candidate for all-around use with table saws and miter saws. The blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all types of saws, from lower-powered…
$39.99
…fine-rip cutting blade for glue-ready joints.This blade incorporates an offset tooth design known as ATB (Alternating Top Bevel), allowing the blade to cut alternately to the left and right, generating a more efficient and cleaner cut in all types of wood. This thin-kerfed blade design meets less resistance…
$50.00
…Ends second-step finishing (jointing and sanding not required).For another option in the Forrest Woodworker II series, check out the Thin Kerf General Purpose Blade.
$120.79
…types of wood. The thin kerfed blade design meets less resistance, for more efficient cutting, and produces less material waste. An oversized 30mm arbor enables more secure fastening of the blade to the saw, further reducing vibration for more precise cutting. 60 tooth; 2.5mm kerf; 30mm arbor; -5 deg…
$130.00
…valid while supplies last!This twin pack of Freud blades includes a 24T General Purpose Blade for ripping and dimensioning, and an 80T Ultra-Fine Crosscut Blade for the fine finishing cuts on intricate molding and joinery. Both blades feature thin-kerf technology, which is less taxing on your saw, and…
(Reg. $119.99)
Now $79.99
SAVE 33% TODAY!
Using advanced technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates…
From $54.97
The LU96R is a thin kerf blade that is designed to give long life and exellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in…
$65.97
This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5 negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus…
From $55.47
Using advanced technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates…
$52.47
The LU96R is a thin kerf blade that is designed to give long life and exellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in…
From $68.97
…Perma-SHIELD® coated blade gives new life to underpowered saws and produces smooth crosscuts in hardwoods, softwoods and moldings. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. Thin kerf blades remove less material than standard carbide blades, thus requiring less…
From $49.47
This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-SHIELD® coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4" to 2-3/4" thick…
$32.97
This heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may occur…
$41.97
(0 Items)