This fast drying solvent replaces paint thinners to accelerate drying time of oil-based paints, enamel and varnish. It is also excellent as a thinner for rubber cement, adhesives and oil-based coatings, and for cleaning brushes and spray equipment. Often used as a lubricant for rubbing out hardened shellac…
$10.49
This eco-conscious solvent outperforms standard lacquer thinner and contains 99%less hazardous air pollutants! Perfect for furniture restoration and finish preparation,it quickly dissolves shellac, laquer and epoxy. Medium drying speed. Sold in quartsand gallons.Please note that this item can only be…
From $7.39
This lacquer reducer promotes excellent flow, and a smooth, even lacquer finish. Makes cleanup a snap! Special blend of solvents is specially formulated for use in nitrocellulose lacquers.
$16.79
This non-flammable, low-odor solvent thins, cleans and preps just like regular paintthinner, only it's a lot better for the environment! The new, safer formula contains noHazardous Air Pollutants*, no ozone-depleting chemicals and is low VOC. It's alsoless harsh on skin and leaves brushes soft and…
From $5.79
Acetone is the strongest consumer-grade solvent available. It is ideal for thinning fiberglass resin, cleaning fiberglass tools and dissolving two-part epoxies and superglue before hardening. A heavy-duty degreaser, it is great for prepping metal before painting. Also thins polyester resins, vinyl…
$11.19
…-fitting dadoes to accept any stock from about 1/2" to 1" thick.Since it's infinitely adjustable within that range, it's perfect for plywood that is thinner than the nominal thickness, and for lumber that's been planed toan odd size. Operation is simple! Once you've set your thickness with the scale and…
$44.99
…gun and all fluid and air passages without damage - it's ideal for all types of paint spray guns. The brushes can be used with all types of paint thinners and spray gun cleaning solvents.
$15.79
This fast-acting, eco-conscious solvent is made with 65% more renewable resourcesand has 65% weaker fumes! It quickly cleans wood, metal, brushes and equipment,and will strip the grease off just about anything.Please note that this item can only be shipped by UPS Ground to addresses withinthe…
$6.99
Made from 95% natural and renewable resources! Dissolve shellac with this ecoconscioussolvent and enjoy a smooth film of high gloss and good color withimproved working consistency. It also works great to clean brushes, equipment, andmore.Please note that this item can only be shipped by UPS Ground…
$8.19
Derived from all natural tree resin, this high-grade thinner is made from 100%renewable resources. Use it in your shop to thin varnish, stain, enamel, paint andmore. Whether for equipment cleanup or surface prep, it delivers quality results withless environmental impact.Please note that this item can…
$9.49
This heavy-duty blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may occur. The Silver…
From $54.97
…-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may occur.The Perma…
From $40.97
…-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may occur.Freud has…
$41.97
…blade's deep gullets and TCG rip and crosscut through hardwoods and softwoods with ease. Although the ideal working range is 1/2" to 2-3/4" thick, thinner or thicker materials may be cut, resulting in some loss of surface finish. The Silver I.C.E. (Industrial Cooling Element) coating helps resist heat…
From $68.47
Manufactured by Crown Hand Tools, these saws keep a thinner blade stiff by reinforcing it with a brass back. Designed for cutting box joints, dovetails, any joinery and fine model making.
From $28.99
…bits includes two slot cutters: use the 1/4" cutter to mill a 1/4" thick tongue and groove for 1/2" to 3/4" stock, or switch to the 1/16" cutter for thinner material. Once the tongue and groove joints are complete, use the solid carbide Radius V-Groove Bit to complete the beadboard design.Application: Create…
From $18.97
Application: Creating interlocking corner joints. Run one board vertically and the piece to be joined horizontally. 99-035 cuts thinner panels for projects such as humidors and jewelry boxes. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers, as…
$108.97
…rolled steel, copper, brass, aluminum sheet and bronze. Soft metal up to 1/8" thick can be cut easily, whether a single sheet of stock or several thinner sheets in a stack.
From $5.59
…be used with manual feeding as well as with power feeders in single or gang-ripping operations. The ideal working range is 1-1/2" to 3-1/2" thick. Thinner or thicker material may be cut, but some loss of surface finish may occur. The Silver I.C.E. (Industrial Cooling Element) coating helps resist heat…
From $64.97
…Hinges to be used with hinge cup hole less than 13mm deep. The spacers fill in the gaps for a solid interface. Often necessary for retrofitting or for thinner doors and narrow stiles where drilling a 13mm cup hole risks boring through the face of the door (e.g. if the door's thickness is reduced by a profiled…
$2.99
This Thinstall universal flat panel fixed wall mount is the first in the industry to be thinner than the width of a penny! The low-profile design is complementary to new ultra-thin flat panel TVs. GlideLock provides tool-free latching for fast installation, and open wall plates allow easy electrical…
$149.99
…important than surface quality. The ideal working range is from 1/4" to 1-1/4" thick for ripping and 1-1/2" to 3-1/2" thick for crosscutting. Thicker or thinner material may be cut, but some loss of surface finish may occur. The Silver I.C.E. (Industrial Cooling Element) coating helps resist heat build-up up…
From $96.47
(0 Items)