Tormek's new T-7 pairs an already widely acclaimed sharpening system with two new innovations for enhanced accuracy, convenience and versatility. With the new Square Edge Jig, your blades will be automatically squared to the grinding wheel without the need for picky adjustments. Since chisels and plane…
$639.00
SAVE on the Ultimate sharpening assortment! We've bundled the Tormek T-7 Sharpening System with the Tormek Woodturner's Accessory Kit, Planer/Joiner Blade Jig, and Handtool Kit to save you money and give you enhanced accuracy, convenience and versatility! With the T-7's new Square Edge Jig, your blades…
$1,307.00
We're pairing the Tormek T-7 Sharpening System with the Tormek Handtool Kit to save you money and give you enhanced accuracy, convenience and versatility! With the T-7's new Square Edge Jig, your blades will automatically be squared to the grinding wheel without the need for picky adjustments. Since…
$805.00
Sharpens HSS blades of any size.
$186.00
We're bundling the Tormek T-7 Sharpening System with the Tormek Woodturner's Accessory Kit, and Handtool Kit to save you money and give you enhanced accuracy, convenience and versatility! With the T-7's new Square Edge Jig, your blades will be automatically squared to the grinding wheel without the…
$1,125.00
This patented jig was developed for short woodcarving tools, butt chisels and tools for power carvers. The jig has two parallel flanges running on both sides of the Universal Support. Max tool width 1-1/4". The technique achieved with this design ensures that at all times the jig - even when…
$27.00
Puts the maximum sharpness on all sizes of scissors and shears. The jig for scissors sharpening comprises a support plate and a holder with two clamps for the scissors. Usually you use only the right clamp. For large scissors and garden shears you use both clamps. You adjust the clamp to fit the…
$52.00
Shape and sharpen all your turning tools with this Tormek Woodturner's Accessory Kit (TNT-708)! You get Gouge Jig (SVD-185) for fingernail shaped bowl gouges and spindle gouges, a Tool Rest (SVD-110) for scrapers, hollowing tools, and thin parting tools, a Turning Tool Setter (TTS-100T) with built-in…
$324.00
…carving tools. Each jig perfectly replicates the edge angle so you can sharpen hand tools faster than ever. This kit works with both the T-7 and T-3 Tormek Sharpening Systems.
$178.00
Keeps your 35254 - Tormek T-7 Sharpening System free from dust and debris when not in use.
$26.00
…to carving tools, knives, scissors, plane irons and more with virtually no visible surface marks. No further honing is necessary. Compatible with Tormek T-7 models.
$294.00
This jig is made especially for long and thin knives. It works in the same way as the SVM-45 jig but it is wider and therefore gives more support to long and thin blades. The jig rests on the Universal Support. The exact edge angle is set by rotating the stop or with the Micro Adjust on the…
$54.00
Trues the stone to perfect roundness and an exact, flat grinding surface. Works with Tormek T-7 Sharpening System.
$86.00
Take a load off your arms and get quick, stable 180 rotation with the new Tormek RB-180 Rotating Base for Tormek Sharpeners. With click-and-twist simplicity, you can now rotate your Tormek Sharpener in seconds to go from sharpening to honing, or from knives to chisels, both of which require the wheel…
$55.00
Set and measure edge angles quickly and easily for accurate knife and tool sharpening with the Tormek AngleMaster WM-200! Works easily in two ways: use it to set a jig to a grindstone so it grinds your tool at any desired edge angle from 10 to 75, or use it to measure an existing edge angle on a tool…
$26.00
Recommended for knives with a minimum blade length of 2-3/8". Plus straight or curved spoke shave blades.
$38.00
Puts the edge back on "V" and fingernail-shaped tools and gouges with a maximum of 1" width. Also for turning cutters. The jig comprises a tool holder which runs in a sleeve. The tool is aligned with a disc and tightened with a knob screw. There is a washer for wide gouges. The stop ring can be set…
$94.00
For carving and carpenter's axes. Maximum axe size 6-1/2". The jig comprises a clamp with a rubber lined, wedge shaped stop, which holds the axe in a fixed position towards the grindstone. The clamp works on the Universal Support, on which it slides across the stone. The jig is designed so that the…
$18.00
Use the Multi-Jig SVS-50 Sharpening System Jig with your Tormek T-7 or T-3 to sharpen turning skew chisels, straight or radiused edge parting and beading tools and roughing gouges. Straight carving gouges up to 2" width.
$66.00
The Tormek Grindstone is constructed so that with the Stone Grader it can be treated to change its property from fast grinding to fine grinding, i.e. sharpening. This has obvious advantages. You can make both the first fast grinding and the sharpening on the same grindstone and the same grinding machine…
$28.00
This Tool Rest is ideal for the grinding of turning scrapers and special tools for woodcarving, e.g. large scorps and inshaves. Also for cabinet scrapers and hollowing tools. It has a generous surface, 90×110 mm (3½"×4¼"), which permits a safe and steady positioning of the tool towards the…
$37.00
For use with Tormek sharpener where aggressive metal removal is necessary. Shapes and sharpens HSS and exotic Alloyed Steels or may be used to touch up tungsten carbide. Works efficiently at low RPMs and offers exceptional wear resistance. Compatible with Tormek T-7 models.
$204.00
Designed specifically for the Tormek T-7 Sharpening System, this wheel has exchangeable leather discs so you can easily replace a disc with a worn tip. The two standard discs have a radius of 3 mm (1/8") and a 60° tip. Removes the burr and polishes the inside on turning and carving gouges and V-tools…
$62.00
Tired of a constant river of water dripping from your grinder onto your bench and floor below? Outfit your Tormek T-7, Tormek 2000, or older models with a 10" stone with the Tormek Advanced Water Trough and eliminate the mess!Features an enlarged standard lip ensuring your workbench stays free from water…
$27.00
Tormek's SVM-00 Small Knife Holder works with the SVM-45 Knife Jig and the T-7 Sharpener to bring speed, ease and perfect consistency to the smallest knife sharpening projects. The SVM-00 allows you to quickly sharpen carving knives, pocket knives, and other knives with blades that are too small to…
$32.00
|
Need Help? |
(0 Items)