The Veneer Smoothing Blade features a beveled Plexiglas blade that never scratches. The 9" handle is constructed of unfinished northern hard maple and the handle butt is beveled for pressing veneer edging. The Veneer Smoothing Blade is a great economical alternative to a veneer hammer.
$18.49
…technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts…
From $54.97
This jig allows you to rip thin strips on the left side of the blade, eliminating the danger of pushing narrow strips between the saw and fence. Since the strip is not trapped between the blade and fence, there is also less risk of binding and kickback. It's simple to use; a single knob locks the jig…
(Reg. $26.99)
Now $19.99
SAVE 25% TODAY!
…slicing veneers and cutting book matched panels 19" x 19" precision ground cast iron table for added stability and work support 4" dust port allows for direct connection of dust collection system Precision computer balanced wheels eliminate vibration for accurate blade tracking Quick release blade tensioning…
$1,784.99
…veneer. This trimmer features double-sided blades and will cut strips up to 0.5 mm thick and 2" wide. Simply place the end trimmer on the end of the panel and firmly press the lever down. You'll get a high-quality cut on all corners of the board! Plastic body. Two (upper and lower) high speed steel blades.
$44.49
…blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Fine Tooth Cross-Cut Saw blade for the TS 75 Plunge Cut Saw is an excellent blade for smooth cross-cutting in veneered plywood, sheet goods, melamine, and hard and soft woods. This blade…
$115.00
…veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needed with this blade! The…
From $90.47
Freud Industrial Series Teflon-coated saw blade. Produces exceptionally clean cuts in veneered plywood and melamine.
From $94.47
…features, the GR-200 will perform operations that were before very dicey and time-consuming with ease and speed. Whether you are making razor-thin veneer strips, building miniatures, or creating exquisite furniture you will save time, materials, and fingers with the GRR-Ripper.
$79.99
…This small Japanese hand saw is used for scoring and cutting panels or veneer. The "Woodpecker" hook tooth at the tip "V" end of the blade is used to scratch line to start the first cut. Metal backbone (Dozuki) helps keep the blade stiff. 7-1/2" Long cane Wrapped wood handle.
$41.99
The SD500 Series of dado sets cuts everything from veneered plywoods and laminates to solid wood, chip and splinter-free with a super smooth, flat bottom. The SD500 Series dado sets were the first to include a 3/32" thick chipper and has the flexibility of an adjustable dado to handle today's undersized…
From $183.47
Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The Fine Tooth saw blade for the Kapex Miter Saw was designed for smooth cross-cutting in veneered plywood, sheet goods, melamine, and hard and soft woods. The Fine Tooth blade incorporates…
$140.00
…lengths are stillavailable for tall cabinets and uppers. No messy contact cement need apply-simplycut the veneer to size with a scissors, peel off the backing and use a veneer smoothing blade (Rockler #24927, sold separately) for the smoothest application possible.
From $31.49
…veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needeed with this blade! Freud…
$65.97
…veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needeed with this blade! The…
From $68.97
…technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts…
$52.47
…be ready for anything with this assorted blade pack and you'll save money too! Resaw your lumber into thin boards or veneers with the sturdy 5/8" blade. Cut thin stock and intricate scrollwork with the 3/16" blade. The 1/4" blade is a great workhorse blade for general purpose work.
$52.49
…easy to use 2-in-1 cornering and trimming tool is perfect for easing off 90 degree corners and trimming veneers. It comes complete with two blades: A veneer trimmer and an edge softening blade for quickly and accurately rounding off sharp edges.
$15.99
…hardwoods up to 2" thick. Ply-veneers of oak and birch will crosscut with no bottom splinter at moderate feed rates. Ends second-step finishing (jointing and sanding not required).For another option in the Forrest Woodworker II series, check out the Thin Kerf General Purpose Blade.
$120.79
…adjustable carbide blade guides, 8-spoke computer balanced band wheels, dual locking cabinet doors, blade tracking adjustment window, and micro-adjustable lower blade guide.Triangular design provides superior column rigidity10" resaw capacity for cutting large pieces of wood, slicing veneers, cutting book…
$1,429.99
…veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needed with this blade! The…
$94.97
You'll get faster feed rates plus absolute splinter control- even on Oak/Birch ply veneers and melamine! Gives you refined cuts every time.
$175.99
…for cutting large pieces of wood, slicing veneers and cutting book matched panels 21" x 21" precision ground cast iron table for added stability and work support 2 Speed poly V-belt drive Precision computer balanced wheels eliminate vibration for accurate blade tracking Foot brake for rapid stops Upper…
$2,904.99
Cut virtually chip-free through veneered plywood, melamine, and laminates with this 7-1/4" blade! Features Freud's TiCo Hi-Density Carbide and Titanium craftsmanship for long life and a flawless finish with every cut.7-1/4" blade with 5/8" arbor
$54.97
…slicing veneers and cutting book matched panels 19" x 19" precision ground cast iron table for added stability and work support 4" dust port allows for direct connection of dust collection systemPrecision computer balanced wheels eliminate vibration for accurate blade trackingQuick release blade tensioning…
$1,939.99
|
Need Help? |
(0 Items)