Get a clean cut and a perfect fit every time. The double edged veneer saw features a compound offset handle making it ideal for use in corners.
$17.49
This jig allows you to rip thin strips on the left side of the blade, eliminating the danger of pushing narrow strips between the saw and fence. Since the strip is not trapped between the blade and fence, there is also less risk of binding and kickback. It's simple to use; a single knob locks the jig…
(Reg. $26.99)
Now $19.99
SAVE 25% TODAY!
This saw is highly recommended for beginning users of Japanese Saws. This small Japanese hand saw is used for scoring and cutting panels or veneer. The "Woodpecker" hook tooth at the tip "V" end of the blade is used to scratch line to start the first cut. Metal backbone (Dozuki) helps keep the blade…
$41.99
…Thicker, more durable edge allows you to shape the edge using various router bits. Plus, pieces are planed to eliminate having to scrape or sand out saw kerf marks.
$10.19
The S 105/4 is an excellent blade for fast and clean cuts in softwoods, hardwoods, melamine, veneered plywood, and chipboard. The cross-set teeth are perfect for both fast and clean cuts. Works well as general purpose blade with great performance and a very good value. Festool jigsaw blades are engineered…
$12.00
Designed to give long life and excellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates.…
From $90.47
Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The Fine Tooth saw blade for the Kapex Miter Saw was designed for smooth cross-cutting in veneered plywood, sheet goods, melamine, and hard and soft woods. The Fine Tooth blade incorporates…
$140.00
…reallywood, you're not the first. Author Carole Rothman reveals the answer to thatand more in this whimsical tribute to the creative potential of the scroll saw.She'll walk you through the creation of 28 unique boxes, including bandsawstyleboxes, jewelry boxes, and lidded boxes. And yes, she'll also demonstrateher…
$24.95
…technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts…
From $54.97
The LU96R is a thin kerf blade that is designed to give long life and exellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in…
From $68.97
…blade especially for track saws, giving this blade extra negative hook angle. The -5 hook angle allows for a smooth, easy cut with a handheld saw. At 160mm in diameter, this blade will fit the Festool TS-55 saw family, the DeWalt DWS520 track saw, and Makita SP600K track saw. The Perma-SHIELD coating…
$65.97
…laminates and melamines. The Perma-SHIELD® coating makes these blades resistant to friction and heat build-up. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. The 10 hook angle and a triple chip grind provide fast cuts and long cutting life. The Perma-SHIELD coating…
From $85.97
In many woodworking shops, one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance…
From $61.97
In many woodworking shops, one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance…
From $71.47
…technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts…
$52.47
Bond practically any lightweight material to light wood easily and instantly with 3M Spray Mount! The easy-to-spray adhesive is very handy for scroll saw work and with a light application, you can reposition your work for exact placement. Will not yellow, become brittle, or flaky. 10.25 ounces.Caution…
$17.99
Designed to give long life and excellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates.…
$94.97
…than standard, polished steel blades. The extra protection from heat stress and pitch build-up helps reduce drag, extending the life of your blade and saw motor.
From $69.47
The SD500 Series of dado sets cuts everything from veneered plywoods and laminates to solid wood, chip and splinter-free with a super smooth, flat bottom. The SD500 Series dado sets were the first to include a 3/32" thick chipper and has the flexibility of an adjustable dado to handle today's undersized…
From $183.47
Cut virtually chip-free through veneered plywood, melamine, and laminates with this 7-1/4" blade! Features Freud's TiCo Hi-Density Carbide and Titanium craftsmanship for long life and a flawless finish with every cut.7-1/4" blade with 5/8" arbor
$54.97
The ultimate combination blade is now available in a thin kerf design with Freud's LU83R. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-…
From $49.97
Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Fine Tooth Cross-Cut Saw blade for the TS 75 Plunge Cut Saw is an excellent blade for smooth cross-cutting in veneered plywood, sheet goods, melamine, and hard and soft woods…
$115.00
Get a smooth-as-sanded surface! Rips and crosscuts hardwoods up to 2" thick. Ply-veneers of oak and birch will crosscut with no bottom splinter at moderate feed rates. Ends second-step finishing (jointing and sanding not required).For another option in the Forrest Woodworker II series, check out the…
$120.79
Freud Industrial Series Teflon-coated saw blade. Produces exceptionally clean cuts in veneered plywood and melamine.
From $94.47
You'll get faster feed rates plus absolute splinter control- even on Oak/Birch ply veneers and melamine! Gives you refined cuts every time.
$175.99
(0 Items)