All Products
products
Power Tools and Shop Accessories
Dust Collection
2-1/2'' Dust Collection Fittings
2-1/2" Dia. Splicer for Dust Hose2-1/2" Splicer units are used to connect full sections of hose for longer runs or to utilize short sections.
2-1/2" Plastic HangersSecures 2-1/2" dust hose and piping out of the way. Works with standard 2-1/2" clear hose (22784), 2-1/2" Dust Right Hose (32150) and 2-1/2" clear pipe (36249). Simple two-screw installation (screws not included).
2-1/2" T-Connector Dust FittingAllows you to design a mainline and branch line dust collection system. Primarily used when space or design limitations will not allow for Y-connectors.1/8" Wall Thickness 6-1/2" long overall, 4-5/8" high 2-1/2" Outside Diameter Ends, 2-1/4" Inner Diameter
2-1/2" CouplingAllows you to connect two 2-1/2" fittings together without the need for additional hose or hose clamps. Example: connect an elbow fitting to a Y-fitting. Plastic. 2-1/2" Coupling has 2-1/2" ID on each to accept 2-1/2" OD fittings.
2-1/2" Hose ClampAvailable for 2-1/2" hoses. Comes in pack of 5. Use flat bladed screwdriver to tighten.
2-1/2" Non Keyed Bridge Hose ClampsEnjoy complete connectivity with these sophisticated 2-1/2" hose clamps. A unique bridge component steps over coils in right-hand spiraling dust hose, allowing all clamping power to transfer directly to the connection. Phillips screw tightening system. 5 per pack. Also available, 4" Non Keyed…
45-degree Dust Collection Fitting, 2-1/2" DiameterGreat for getting your dust collection system around corners without losing efficiency. Helpful for horizontal and vertical changes in direction. Easily attaches to dust hose.
2-1/2" Steel Base Clamp-5/Pk1/2" wide x 2-1/2" Metal Hose Clamp.5 per pack.Use flat bladed screwdriver to tighten
4" x 2-1/2" Round Swivel Dust PortHard plastic port features a swivel top for easy access from any direction. With 4" and 2-1/2" fittings for transitioning between different sized hoses or from tool to hose. 360 degree swivel.
2-1/2" T-ConnectorAllows you to design a mainline and branch line dust collection system. 2-1/2" hose.1/8" Wall Thickness 2-1/2" Outside Diameter Ends
3" Keyed Hose Clamps3" Keyed hose clamps have a thumb screw that allows you to quickly tighten or loosen without a screwdriver or wrench. Makes setting up, changing or cleaning your dust collection system easier! 5 per pack.
(0 Items)
