Freud LU84R Industrial Combination Saw BladeIn many woodworking shops, one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4" plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip…
Freud LU82M Industrial Heavy Duty Multi-Purpose Saw BladeThis multi-purpose blade will cut stacks of manmade wood products as well as hardwood and softwood up to 2-3/4" thick. The blade's deep gullets and TCG rip and crosscut through hardwoods and softwoods with ease. Although the ideal working range is 1/2" to 2-3/4" thick, thinner or thicker materials…
Freud LU83R Industrial Thin Kerf Heavy Duty Combination Saw BladeThe ultimate combination blade is now available in a thin kerf design with Freud's LU83R. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-…
Freud LU88R Industrial Thin Kerf Fine Finish Crosscut Saw BladeThis Perma-SHIELD® coated blade gives new life to underpowered saws and produces smooth crosscuts in hardwoods, softwoods and moldings. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. Thin kerf blades remove less material than standard carbide blades, thus…
Irwin Marples 10" Saw Blade, 50T ATB+RThis 50-tooth combination blade features mid-size hook teeth with extra-deep gullets every five teeth. This allows efficient chip ejection during rip cuts, while maintaining excellent finish quality on crosscuts. The blade also features a thin kerf design, which reduces dust and material waste, and…
Freud LU73M Industrial Cabinetmaker's Crosscut Saw BladeThis heavy-duty blade is designed primarily for heavy use in a cabinetmaker's shop. Combining a 10 hook angle and the alternate top bevel tooth grind, this blade provides a good crosscut and long cutting life in hardwood, softwood, plywood, and chipboard. The LU73M series is ideal for cutting a…
Freud LU86R Industrial Thin Kerf General Purpose Saw BladeThis heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may…
Freud LU81M Industrial Heavy Duty Stacked Chipboard Saw BladeThis blade is ideal for sizing sheet goods (chipboard, plywood, laminates, MDF) where speed is more important than a smooth finish or when cutting stacks of material. These blades are best used when cutting plywood and composition material, but they can also be used with hardwood and softwood. The…
Freud LU72M Industrial General Purpose Saw BladeThis heavy-duty blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may occur. The…
Freud LU89M Industrial Thick Non-Ferrous Metal Saw BladeThis heavy-duty, non-ferrous metal cutting blade produces an excellent finish. These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life. Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40…
Freud LU98R Industrial Single Sided Laminate/Melamine Saw BladeThis fast-cutting blade is ideal for a perfect finish on one side of laminates and melamines. The Perma-SHIELD® coating makes these blades resistant to friction and heat build-up. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. The 10 hook angle and a triple…
Freud LU92M Industrial Thick-Stock Laminate Saw BladeThis heavy-duty production blade produces an excellent finish on the top and bottom of thick laminates and melamine. The LU92M series is ideal for cutting stacked 3/4" laminates and melamine. Each tooth has a special modified triple chip grind design created by computer simulation to breeze through…
(3)
